You are here:Home >> Products >> RF DIM Controll... >> LED Controller

Products

Products

COB LED strip
Strip Flex
Special LED Strip
Neon Flex
IC Built in LED Strip
LED linear Light
Silicon flex tube
LED Profile
Accessory

Contact us

RF DIM Controller

6Ax1CH 12-36VDC CV Dimming Controller KV

Summary
● Rotary panel constant voltage or constant current LED dimmer, can also be used as dimming RF remote.
● Rotate knob to change brightness, support push and long push operation.
● Smooth dimming and switch without any flickering.
● Great compatibility with a variety of dimming RF remote.
● Adopt 2.4GHz wireless technology, remote distance up to 30m, one dimmer can accept up to 10 remote control.
● Work with WiFi-relay controller after install APP on IOS and Android system.

    The rotary dimmer KV / KC is a single color LED controller with constant voltage or constant current output, which
    offers both switch and smooth brightness dimming functions by push or rotate the knob. Smooth dimming range
    from 0.1%-100% without any flickering can be very comfortable for human eyes. It is easy to install the wall switch
    into existing standard size wall boxes.

    Feature


    ● One channel constant voltage or constant current output.
    ● Rotate knob to change brightness, support push and long push operation.
    ● Smooth dimming and switch without any flickering.
    ● Great compatibility with a variety of dimming RF remote.
    ● Adopt 2.4GHz wireless technology, remote distance up to 30m.
    ● Work with WiFi-relay controller after install APP on IOS and Android system.

    Technical parameter


    r

    Dimension



    Match guide


    There are two kinds of method to match the rotary panel dimmer with the RF remote.
    ● Use Knob

    1. Match: Turn on light, turn off, immediately push the knob for 5s,
    within 5s, press on/off key or zone key of the RF remote.
     
    2. Delete: Turn on light, turn off, immediately push the knob for 10s, delete all matched RF remote.
     
    3. Multiple zone RF remote only use zone key to match each zone receiver.

    ● Use Power-up

    1. Match: Switch off the power, then switch on power again,
    short press on/off key or zone key 3 times on the RF remote quickly within 5s after power on,
    the link is done once the light blinks 3 times.
     
    2. Delete: Switch off the power, then switch on power again,
    short press on/off key or zone key 5 times on the RF remote quickly within 5s after power on,
    the unlink is done once the light blinks 5 times.
     
    3. Multiple zone remote only use zone key to match each zone receiver.

    Knob function


    ● Push: Turn on or off light.
    After turn on light:
    ● Rotate: Rotate knob to adjust brightness, 2.5 turns, 50 levels.
    ● Long push(1-5s): Continuous 256 levels brightness adjustment.

    Interface specification


    Wiring diagram

    ● KV connect with single color LED strip



    ● KC connect with Hi-power LED



    Power supply select guide


    For KV, LED power supply voltage and power select :
    ● 12V lamp, Input 12V power supply, can load 0~72W,
    ● 24V lamp, Input 24V power supply, can load 0~144W,
    ● 36V lamp, Input 36V power supply, can load 0~216W,
    ● 48V lamp, Input 36V power supply, can load 0~288W,
    The power supply power must larger than load power 20%.

    For KC, LED power supply voltage select:
    ● Input 48V power supply, can series connect 1~13pcs LED,
    ● Input 36V power supply, can series connect 1~10pcs LED,
    ● Input 24V power supply, can series connect 1~6pcs LED.
    ● Input 12V power supply, can series connect 1~3pcs LED.

    Installation diagram



    Malfunctions analysis & troubleshooting



    Safety information

    1. The product shall be installed and serviced by a qualified person.
    2. The product is non-waterproof. Please avoid the sun and rain.
    3. Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation.
    4. Please check if the output voltage of any power supplies used comply with the working voltage
    of the product.
    5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
    any damages to the LED lights.
    6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
    File Name : Format: Size: Download:
    Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products